Materials

Research outputs

  1. 2019
  2. Published

    Assessment for Sustainable Use of Quarry Fines as Pavement Construction Materials: Part II-Stabilization and Characterization of Quarry Fine Materials

    Zhang, Y., Korkiala-Tanttu, L. & Borén, M., 1 Aug 2019, In : Materials. 12, 15, 2450.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Selective laser melting of duplex stainless Steel 2205 : Effect of post-processing heat treatment on microstructure, mechanical properties, and corrosion resistance

    Papula, S., Song, M., Pateras, A., Chen, X. B., Brandt, M., Easton, M., Yagodzinskyy, Y., Virkkunen, I. & Hänninen, H., 1 Aug 2019, In : Materials. 12, 15, 2468.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    A multiscale modelling approach for estimating the effect of defects in unidirectional carbon fiber reinforced polymer composites

    Antin, K. N., Laukkanen, A., Andersson, T., Smyl, D. & Vilaça, P., 12 Jun 2019, In : Materials. 12, 12, 2885.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Progress on electrolytes development in dye-sensitized solar cells

    Iftikhar, H., Sonai, G. G., Hashmi, S. G., Nogueira, A. F. & Lund, P. D., 1 Jun 2019, In : Materials. 12, 12, 1998.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  6. Published

    Mechanical properties and applications of recycled polycarbonate particle material extrusion-based additive manufacturing

    Reich, M. J., Woern, A. L., Tanikella, N. G. & Pearce, J. M., 1 May 2019, In : Materials. 12, 10, 18 p., 1642.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published
  8. Published

    Conductive cellulose based foam formed 3D shapes-from innovation to designed prototype

    Siljander, S., Keinänen, P., Ivanova, A., Lehmonen, J., Tuukkanen, S., Kanerva, M. & Björkqvist, T., 31 Jan 2019, In : Materials. 12, 3, 430.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Aluminum Nitride Transition Layer for Power Electronics Applications Grown by Plasma-Enhanced Atomic Layer Deposition

    Seppänen, H., Kim, I., Etula, J., Ubyivovk, E., Buravlev, A. & Lipsanen, H., 28 Jan 2019, In : Materials. 12, 3, 8 p., 406.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Simulation of the impact of ionized impurity scattering on the total mobility in si nanowire transistors

    Sadi, T., Medina-Bailon, C., Nedjalkov, M., Lee, J., Badami, O., Berrada, S., Carrillo-Nunez, H., Georgiev, V., Selberherr, S. & Asenov, A., 2 Jan 2019, In : Materials. 12, 1, 124.

    Research output: Contribution to journalArticleScientificpeer-review

  11. 2018
  12. Published

    Fundamentals of force-controlled friction riveting: Part II-Joint global mechanical performance and energy efficiency

    Cipriano, G. P., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 7 Dec 2018, In : Materials. 11, 12, 2489.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Effect of shell growth on the morphology of polyvinyl acetate/polystyrene inverted core-shell latex fabricated by acrylonitrile grafting

    Sun, J., Zhang, X., Bai, L., Li, Z., Jia, Z. & Gu, J., 6 Dec 2018, In : Materials. 11, 12, 15 p., 2482.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Fundamentals of force-controlled friction riveting: Part I-joint formation and heat development

    Cipriano, G. P., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 15 Nov 2018, In : Materials. 11, 11, 2294.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Sorption-related characteristics of surface charred spruce wood

    Kymäläinen, M., Turunen, H., Čermák, P., Hautamäki, S. & Rautkari, L., 24 Oct 2018, In : Materials. 11, 11, 2083.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Fused particle fabrication 3-D printing: Recycled materials' optimization and mechanical properties

    Woern, A. L., Byard, D. J., Oakley, R. B., Fiedler, M. J., Snabes, S. L. & Pearce, J. M., 12 Aug 2018, In : Materials. 11, 8, 1413.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Control of the size of silver nanoparticles and release of silver in heat treated SiO2-Ag composite powders

    Granbohm, H., Larismaa, J., Ali, S., Johansson, L. S. & Hannula, S. P., 5 Jan 2018, In : Materials. 11, 1, 80.

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2017
  19. Published

    Diffusion-Driven Charge Transport in Light Emitting Devices

    Kim, I., Kivisaari, P., Oksanen, J. & Suihkonen, S., 12 Dec 2017, In : Materials. 10, 12, p. 1-17 17 p., 1421.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  20. Published

    Effect of different carbon sources on bacterial nanocellulose production and structure using the low pH resistant strain Komagataeibacter medellinensis

    Molina-Ramírez, C., Castro, M., Osorio, M., Torres-Taborda, M., Gómez, B., Zuluaga, R., Gómez, C., Gañán, P., Rojas, O. J. & Castro, C., 11 Jun 2017, In : Materials. 10, 6, 13 p., 639.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Hydrogen-induced delayed cracking in TRIP-aided lean-alloyed ferritic-austenitic stainless steels

    Papula, S., Sarikka, T., Anttila, S., Talonen, J., Virkkunen, I. & Hänninen, H., 3 Jun 2017, In : Materials. 10, 6, 613.

    Research output: Contribution to journalArticleScientificpeer-review

  22. 2016
  23. Published

    A novel nanohybrid nanofibrous adsorbent for water purification from dye pollutants

    Homaeigohar, S., Zillohu, A. U., Abdelaziz, R., Hedayati, M. K. & Elbahri, M., 19 Oct 2016, In : Materials. 9, 10, p. 1-16 16 p., 848.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Broadband anti-reflective coating based on plasmonic nanocomposite

    Hedayati, M. K., Abdelaziz, M., Etrich, C., Homaeigohar, S., Rockstuhl, C. & Elbahri, M., 28 Jul 2016, In : Materials. 9, 8, 636.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Physico-Chemical Alternatives in Lignocellulosic Materials in Relation to the Kind of Component for Fermenting Purposes

    Coz, A., Llano, T., Cifrian, E., Viguri, J., Maican, E. & Sixta, H., Jul 2016, In : Materials. 9, 7, 37 p., 574.

    Research output: Contribution to journalLiterature reviewScientificpeer-review

  26. Published

    Antireflective coatings: Conventional stacking layers and ultrathin plasmonic metasurfaces, a mini-review

    Hedayati, M. K. & Elbahri, M., 21 Jun 2016, In : Materials. 9, 6, 497.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  27. Published

    Silica-gentamicin nanohybrids: Synthesis and antimicrobial action

    Ahmed Mosselhy, D., Ge, Y., Gasik, M., Nordström, K., Natri, O. & Hannula, S-P., 2016, In : Materials. 9, 3, 16 p., 170.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    The Effect of ZrO2 Nanoparticles on the Microstructure and Properties of Sintered WC–Bronze-Based Diamond Composites

    Sun, Y., Wu, H., Li, M., Meng, Q., Gao, K., Lu-Tervola, X. & Liu, B., 2016, In : Materials. 9, 5, 343.

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2015
  30. Published

    Review of Recent Progress of Plasmonic Materials and Nano-Structures for Surface-Enhanced Raman Scattering

    Wang, A. X. & Kong, X., 2015, In : Materials. 8, 6, p. 3024-3052

    Research output: Contribution to journalReview ArticleScientificpeer-review

  31. 2014
  32. Published

    Nanocomposite Electrospun Nanofiber Membranes for Environmental Remediation

    Homaeigohar, S. & Elbahri, M., Feb 2014, In : Materials. 7, 2, p. 1017-1045 29 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  33. Published

    Thermo-plasmonics for localized graphitization and welding of polymeric nanofibers

    Zillohu, A. U., Alissawi, N., Abdelaziz, R. & Elbahri, M., 2014, In : Materials. 7, 1, p. 323-332 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. 2013
  35. Published

    Simple Preparation of Novel Metal-Containing Mesoporous Starches

    Ojeda, M., Budarin, V., Shuttleworth, P. S., Clark, J. H., Pineda, A., Balu, A. M., Romero, A. A. & Luque, R., 2013, In : Materials. 6, 5, p. 1891-1902

    Research output: Contribution to journalArticleScientificpeer-review

  36. 2011
  37. Published

    Plasmonic Coaxial Waveguides with Complex Shapes of Cross-Sections

    Kozina, O., Nefedov, I., Melnikov, L. & Karilainen, A., 2011, In : Materials. 4, 1, p. 104-116

    Research output: Contribution to journalArticleScientificpeer-review

  38. 2009
  39. Published

    Combined thermodynamic-kinetic analysis of the interfacial reactions between Ni metallization and various lead-free solders

    Laurila, T. & Vuorinen, V., 2009, In : Materials. 2, 4, p. 1796-1834 39 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 334720