Journal of Power Sources

Research outputs

  1. 2020
  2. Published

    Modeling of Zinc Bromine redox flow battery with application to channel design

    Xu, Z., Wang, J., Yan, S. C., Fan, Q. & Lund, P. D., 29 Feb 2020, In : Journal of Power Sources. 450, 9 p., 227436.

    Research output: Contribution to journalArticle

  3. Published
  4. Published

    A high-performance all-iron non-aqueous redox flow battery

    Zhen, Y., Zhang, C., Yuan, J., Zhao, Y. & Li, Y., 1 Jan 2020, In : Journal of Power Sources. 445, 227331.

    Research output: Contribution to journalArticle

  5. 2019
  6. Published

    Enhancing the performance of an all-organic non-aqueous redox flow battery

    Yuan, J., Zhang, C., Zhen, Y., Zhao, Y. & Li, Y., 15 Dec 2019, In : Journal of Power Sources. 443, 227283.

    Research output: Contribution to journalArticle

  7. Published

    A facile method to produce TiO2 nanorods for high-efficiency dye solar cells

    Wan, J., Tao, L., Wang, B., Zhang, J., Wang, H. & Lund, P. D., 31 Oct 2019, In : Journal of Power Sources. 438, p. 1-8 227012.

    Research output: Contribution to journalArticle

  8. Published

    X-ray transparent proton-exchange membrane fuel cell design for in situ wide and small angle scattering tomography

    Martens, I., Vamvakeros, A., Chattot, R., Blanco, M. V., Rasola, M., Pusa, J., Jacques, S. D. M., Bizzotto, D., Wilkinson, D. P., Ruffmann, B. & 3 others, Heidemann, S., Honkimäki, V. & Drnec, J., 15 Oct 2019, In : Journal of Power Sources. 437, p. 1-8 226906.

    Research output: Contribution to journalArticle

  9. Published

    Enhanced activity and stability of Sr 2 FeMo 0.65 Ni 0.35 O 6-δ anode for solid oxide fuel cells with Na doping

    Yao, T., Hou, N., Gan, J., Wang, J., Zhi, X., Fan, L., Gan, T., Zhao, Y. & Li, Y., 15 Jun 2019, In : Journal of Power Sources. 425, p. 103-109 7 p.

    Research output: Contribution to journalArticle

  10. Published

    ZnO-promoted surface diffusion on NiO-Ce 0.8 Sm 0.2 O 1.9 anode for solid oxide fuel cell

    Zhi, X., Gan, T., Hou, N., Fan, L., Yao, T., Wang, J., Zhao, Y. & Li, Y., 31 May 2019, In : Journal of Power Sources. 423, p. 290-296 7 p.

    Research output: Contribution to journalArticle

  11. Published
  12. 2018
  13. Published
  14. Published

    Validating the technological feasibility of yttria-stabilized zirconia-based semiconducting-ionic composite in intermediate-temperature solid oxide fuel cells

    Cai, Y., Wang, B., Wang, Y., Xia, C., Qiao, J., van Aken, P. A., Zhu, B. & Lund, P., 30 Apr 2018, In : Journal of Power Sources. 384, p. 318–327 10 p.

    Research output: Contribution to journalArticle

  15. 2017
  16. Published

    Critical analysis of open circuit voltage and its effect on estimation of irreversible heat for Li-ion pouch cells

    Arora, S., Shen, W. & Kapoor, A., 2017, In : Journal of Power Sources. 350, p. 117-126 10 p.

    Research output: Contribution to journalArticle

  17. 2016
  18. Published

    Enhanced oxygen reduction reaction activity of iron-containing nitrogen-doped carbon nanotubes for alkaline direct methanol fuel cell application

    Ratso, S., Kruusenberg, I., Sarapuu, A., Rauwel, P., Saar, R., Joost, U., Aruväli, J., Kanninen, P., Kallio, T. & Tammeveski, K., 15 Nov 2016, In : Journal of Power Sources. 332, p. 129-138 10 p.

    Research output: Contribution to journalArticle

  19. Published

    Effect of extreme temperatures on battery charging and performance of electric vehicles

    Lindgren, J. & Lund, P. D., 1 Oct 2016, In : Journal of Power Sources. 328, p. 37-45 9 p.

    Research output: Contribution to journalArticle

  20. Published
  21. Published

    Quasi-solid electrolyte with polyamidoamine dendron modified-talc applied to dye-sensitized solar cells

    Andrade, M. A. S., Nogueira, A. F., Miettunen, K., Tiihonen, A., Lund, P. D. & Pastore, H. O., 1 Sep 2016, In : Journal of Power Sources. 325, p. 161-170 10 p.

    Research output: Contribution to journalArticle

  22. Published

    Industrial-grade rare-earth and perovskite oxide for high-performance electrolyte layer-free fuel cell

    Xia, C., Wang, B., Ma, Y., Cai, Y., Afzal, M., Liu, Y., He, Y., Zhang, W., Dong, W., Li, J. & 1 others, Zhu, B., 1 Mar 2016, In : Journal of Power Sources. 307, p. 270-279 10 p.

    Research output: Contribution to journalArticle

  23. Published

    Performance of electrocatalytic gold coating on bipolar plates for SO2 depolarized electrolyser

    Santasalo-Aarnio, A., Lokkiluoto, A., Virtanen, J. & Gasik, M., 29 Feb 2016, In : Journal of Power Sources. 306, 29 February 2016, p. 1-7 7 p.

    Research output: Contribution to journalArticle

  24. 2015
  25. Published

    Highly active nitrogen-doped nanocarbon electrocatalysts for alkaline direct methanol fuel cell

    Kruusenberg, I., Ratso, S., Vikkisk, M., Kanninen, P., Kallio, T., Kannan, A. M. & Tammeveski, K., 1 May 2015, In : Journal of Power Sources. 281, p. 94-102 9 p.

    Research output: Contribution to journalArticle

  26. Published

    Comparative study of carbon free and carbon containing Li4Ti5O12 electrodes

    Pohjalainen, E., Kallioinen, J. & Kallio, T., Apr 2015, In : Journal of Power Sources. 279, p. 481-486 6 p.

    Research output: Contribution to journalArticle

  27. Published

    Study and characterization of positive electrolytes for application in the aqueous all-copper redox flow battery

    Sanz, L., Lloyd, D., Magdalena, E., Palma, J., Anderson, M. & Kontturi, K., 15 Mar 2015, In : Journal of Power Sources. 278, p. 175-182 8 p.

    Research output: Contribution to journalArticle

  28. Published

    Direct alcohol fuel cells: Increasing platinum performance by modification with sp-group metals

    Costa Figueiredo, M., Sorsa, O., Doan, T., Pohjalainen, E., Hildebrand, H., Schmuki, P., Wilson, B. P. & Kallio, T., 1 Feb 2015, In : Journal of Power Sources. 275, p. 341-350 10 p.

    Research output: Contribution to journalArticle

  29. Published

    Entropy change characteristics of LiMn0.67Fe0.33PO4 and Li4Ti5O12 electrode materials

    Jalkanen, K. & Vuorilehto, K., 1 Jan 2015, In : Journal of Power Sources. 273, p. 351-359 9 p.

    Research output: Contribution to journalArticle

  30. Published

    Preparation of a cost-effective, scalable and energy efficient all-copper redox flow battery

    Lloyd, D., Magdalena, E., Sanz, L., Murtomäki, L. & Kontturi, K., 2015, In : Journal of Power Sources. 292, 1 October 2015, p. 87-94

    Research output: Contribution to journalArticle

  31. 2014
  32. Published

    Laser Additive Manufacturing of Stainless Steel Micro Fuel Cells

    Scotti, G., Matilainen, V., Kanninen, P., Piili, H., Salminen, A., Kallio, T. & Franssila, S., 25 Dec 2014, In : Journal of Power Sources. 272, p. 356-361 6 p.

    Research output: Contribution to journalArticle

  33. Published

    Review and analysis of characterization methods and ionic conductivities for low-temperature solid oxide fuel cells (LT-SOFC)

    Patakangas, J., Ma, Y., Jing, Y. & Lund, P., 1 Oct 2014, In : Journal of Power Sources. 263, p. 315-331 17 p.

    Research output: Contribution to journalLiterature review

  34. Published

    Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries

    Caglar, B., Fischer, P., Kauranen, P., Karttunen, M. & Elsner, P., 15 Jun 2014, In : Journal of Power Sources. 256, p. 88-95 8 p.

    Research output: Contribution to journalArticle

  35. Published

    Description and performance of a novel aqueous all-copper redox flow battery

    Sanz, L., Lloyd, D., Magdalena, E., Palma, J. & Kontturi, K., 2014, In : Journal of Power Sources. 268, p. 121-128

    Research output: Contribution to journalArticle

  36. Published

    Electrolyte depletion control laws for lead-acid battery discharge optimisation

    Tenno, R. & Nefedov, E., 2014, In : Journal of Power Sources. 270, p. 658-667

    Research output: Contribution to journalArticle

  37. Published

    Low surface area graphene/cellulose composite as a host matrix for lithium sulphur batteries

    Patel, M. U. M., Luong, N. D., Seppälä, J., Tchernychova, E. & Dominko, R., 2014, In : Journal of Power Sources. 254, p. 55-61 7 p.

    Research output: Contribution to journalArticle

  38. 2013
  39. Published
  40. Published

    Water soluble binder for fabrication of Li4Ti5O12 electrodes

    Pohjalainen, E., Räsänen, S., Jokinen, M., Yliniemi, K., Worsley, D. A., Kuusivaara, J., Juurikivi, J., Ekqvist, R., Kallio, T. & Karppinen, M., 15 Mar 2013, In : Journal of Power Sources. 226, p. 134-139 6 p.

    Research output: Contribution to journalArticle

  41. Published

    Entropy change effects on the thermal behavior of a LiFePO4/graphite lithium-ion cell at different states of charge

    Jalkanen, K., Aho, T. & Vuorilehto, K., 2013, In : Journal of Power Sources. 243, xx, p. 354-360

    Research output: Contribution to journalArticle

  42. Published

    Life cycle assessment of gas atomised sponge nickel for use in alkaline hydrogen fuel cell applications

    Wilson, B. P., Lavery, N. P., Jarvis, D. J., Anttila, T., Rantanen, J., Brown, S. G. R. & Adkins, N. J., 2013, In : Journal of Power Sources. 243, XX, p. 242-252

    Research output: Contribution to journalArticle

  43. 2012
  44. Published

    Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells - A review

    Arvay, A., Yli-Rantala, E., Liu, C. H., Peng, X. H., Koski, P., Cindrella, L., Kauranen, P., Wilde, P. M. & Kannan, A. M., 1 Sep 2012, In : Journal of Power Sources. 213, p. 317-337 21 p.

    Research output: Contribution to journalReview Article

  45. Published

    Kinetics of oxygen reduction reaction on nanostructured thin-film platinum alloy catalyst

    Ahluwalia, R., Wang, X., Lajunen, A., Steinbach, A., Hendricks, S., Kurkowski, M. & Debe, M., 2012, In : Journal of Power Sources. 215, 1, p. 77-88

    Research output: Contribution to journalArticle

  46. 2011
  47. Published

    In and ex situ characterization of an anion-exchange membrane for alkaline direct methanol fuel cell (ADMFC)

    Santasalo-Aarnio, A., Hietala, S., Rauhala, T. & Kallio, T., 1 Aug 2011, In : Journal of Power Sources. 196, 15, p. 6153-6159 7 p.

    Research output: Contribution to journalArticle

  48. 2010
  49. Published

    Development of integrated fuel cell hybrid power source for electric forklift

    Keränen, T., Karimäki, H., Viitakangas, J., Vallet, J., Ihonen, J., Hyötylä, P., Uusalo, H. & Tingelöf, T., 2010, In : Journal of Power Sources. 196, 21, p. 9058-9068

    Research output: Contribution to journalArticle

  50. Published

    Enhancement of glucose electro-oxidation by an external electromagnetic field in direct-mode fuel cells

    Spets, J-P., Kuosa, M. A., Kiros, Y., Anttila, T., Rantanen, J., Lampinen, M. J. & Saari, K., 2010, In : Journal of Power Sources. 195, 2, p. 475-479

    Research output: Contribution to journalArticle

  51. 2009
  52. Published

    Modelling compression pressure distribution in fuel cell stacks

    Mikkola, M., Tingelöf, T. & Ihonen, J. K., 1 Aug 2009, In : Journal of Power Sources. 193, 1, p. 269-275 7 p.

    Research output: Contribution to journalArticle

  53. 2007
  54. Published

    A 3D model for the free-breating direct methanol fuel cell: Methanol corssover aspects and validations with current distribution measurements

    Saarinen, V., Himanen, O., Kallio, T., Sundholm, G. & Kontturi, K., 25 Oct 2007, In : Journal of Power Sources. 172, 2, p. 805-815 11 p.

    Research output: Contribution to journalArticle

  55. Published

    Inhomogeneous compression of PEMFC gas diffusion layer Part I. Experimental

    Nitta, I., Hottinen, T., Himanen, O. & Mikkola, M., 19 Sep 2007, In : Journal of Power Sources. 171, 1, p. 26-36 11 p.

    Research output: Contribution to journalArticle

  56. Published

    Current distribution measurements with a free-breathing direct methanol fuel cell using TVDF-g-PSSA and Nafion 117® membranes

    Saarinen, V., Himanen, O., Kallio, T., Sundholm, G. & Kontturi, K., 1 Jan 2007, In : Journal of Power Sources. 163, 2, p. 768-776 9 p.

    Research output: Contribution to journalArticle

  57. Published

    Inhomogeneous compression of PEMFC gas diffusion layer: Part II.Modeling the effect

    Hottinen, T., Himanen, O., Karvonen, S. & Nitta, I., 2007, In : Journal of Power Sources. 171, 1, p. 113-121

    Research output: Contribution to journalArticle

  58. 2006
  59. Published

    Injection moulding of graphite composite bipolar plates

    Müller, A., Kauranen, P., Von Ganski, A. & Hell, B., 21 Mar 2006, In : Journal of Power Sources. 154, 2, p. 467-471 5 p.

    Research output: Contribution to journalArticle

  60. Published

    Performance of planar free-breathing PEMFC at temperatures below freezing

    Hottinen, T., Himanen, O. & Lund, P., 9 Mar 2006, In : Journal of Power Sources. 154, 1, p. 86-94 9 p.

    Research output: Contribution to journalArticle

  61. Published

    Battery impedance characterization through inspection of discharge curve and testing with short pulses

    Tenno, A., Tenno, R. & Suntio, T., 2006, In : Journal of Power Sources. 158, 2, p. 1029-1033

    Research output: Contribution to journalArticle

  62. Published

    Modeling of flow field in polymer electrolyte membrane fuel cell

    Karvonen, S., Hottinen, T., Saarinen, J. & Himanen, O., 2006, In : Journal of Power Sources. 161, p. 876-884

    Research output: Contribution to journalArticle

  63. Published

    The financial viability of an SOFC congeneration system in single-family dwellings

    Alanne, K., Saari, A., Ugurusal, V. I. & Good, J., 2006, In : Journal of Power Sources. 158, 1, p. 403-416

    Research output: Contribution to journalArticle

  64. 2004
  65. Published

    Effect of cathode structure on planar free-breathing PEMFC

    Hottinen, T., Himanen, O. & Lund, P. D., 15 Nov 2004, In : Journal of Power Sources. 138, 1-2, p. 205-210 6 p.

    Research output: Contribution to journalArticle

Previous 1 2 Next

ID: 313454