Advanced Research PortalJournalsJournal of Materials Science Research outputs

Journal of Materials Science

Research outputs

1 - 50 out of 61Page size: 50
  1. 2020
  2. Published

    A predictive failure framework for brittle porous materials via machine learning and geometric matching methods

    Karakoç, A. & Keleş, Ö., 1 Apr 2020, In : Journal of Materials Science. 55, 11, p. 4734-4747 14 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  3. 2019
  4. Published

    One-sided surface charring of beech wood

    Čermák, P., Dejmal, A., Paschová, Z., Kymäläinen, M., Dömény, J., Brabec, M., Hess, D. & Rautkari, L., 15 Jul 2019, In : Journal of Materials Science. 54, 13, p. 9497-9506 10 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  5. 2018
  6. Published

    Thermodynamic properties of Ag–Au–Pd alloys measured by a solid-state EMF method

    Santoso, I. & Taskinen, P., Jun 2018, In : Journal of Materials Science. 53, 12, p. 9232-9242 11 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  7. Published

    Chemical, water vapour sorption and ultrastructural analysis of Scots pine wood thermally modified in high-pressure reactor under saturated steam

    Kymäläinen, M., Ben Mlouka, S., Belt, T., Merk, V., Liljeström, V., Hänninen, T., Uimonen, T., Kostiainen, M. & Rautkari, L., Feb 2018, In : Journal of Materials Science. 53, 4, p. 3027–3037 11 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  8. 2017
  9. Published

    The influence of extractives on the sorption characteristics of Scots pine (Pinus sylvestris L.)

    Vahtikari, K., Rautkari, L., Noponen, T., Lillqvist (née Laine), K. & Hughes, M., 1 Sep 2017, In : Journal of Materials Science. 52, 18, p. 10840-10852 13 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  10. Published

    Atomic/molecular layer deposition of hybrid inorganic–organic thin films from erbium guanidinate precursor

    Mai, L., Giedraityte, Z., Schmidt, M., Rogalla, D., Scholz, S., Wieck, A. D., Devi, A. & Karppinen, M., Jun 2017, In : Journal of Materials Science. 52, 11, p. 6216-6224 9 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  11. Published

    Surface modification of solid wood by charring

    Kymäläinen, M., Hautamäki, S., Lillqvist, K., Segerholm, K. & Rautkari, L., 1 May 2017, In : Journal of Materials Science. 52, 10, p. 6111-6119 9 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  12. Published

    Strongly reduced thermal conductivity in hybrid ZnO/nanocellulose thin films

    Jin, H., Marin, G., Giri, A., Tynell, T., Gestranius, M., Wilson, B. P., Kontturi, E., Tammelin, T., Hopkins, P. E. & Karppinen, M., May 2017, In : Journal of Materials Science. 52, 10, p. 6093-6099 7 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  13. Published

    High-concentration shear-exfoliated colloidal dispersion of surfactant–polymer-stabilized few-layer graphene sheets

    Phiri, J., Gane, P. & Maloney, T., 4 Apr 2017, In : Journal of Materials Science. 52, 13, p. 8321 8337 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  14. 2016
  15. Published

    Crystal structure and photocatalytic properties of titanate nanotubes prepared by chemical processing and subsequent annealing

    Ali, S., Granbohm, H., Ge, Y., Singh, V. K., Nilsén, F. & Hannula, S. P., Aug 2016, In : Journal of Materials Science. 51, 15, p. 7322–7335 14 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  16. Published

    Carbon fiber-reinforced epoxy filament-wound composite laminates exposed to hygrothermal conditioning

    Almeida, J. H. S., Souza, S. D. B., Botelho, E. C. & Amico, S. C., 1 May 2016, In : Journal of Materials Science. 51, 9, p. 4697-4708 12 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  17. Published

    Microcrystalline cellulose property–structure effects in high-pressure fluidization: microfibril characteristics

    Vanhatalo, K., Lundin, T., Koskimäki, A., Lillandt, M. & Dahl, O., 28 Mar 2016, In : Journal of Materials Science. 51, 12, p. 6019-6034 16 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  18. Published

    Effect of size and measurement domain on the in-plane elasticity of wood-like cellular materials

    Karakoc, A. & Freund, J., 1 Feb 2016, In : Journal of Materials Science. 51, 3, p. 1490-1495 6 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  19. Published

    The effect of elevated temperature and high moisture content on the fracture behaviour of thermally modified spruce

    Tukiainen, P. & Hughes, M., 1 Feb 2016, In : Journal of Materials Science. 51, 3, p. 1437-1444 8 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  20. Published

    The effect of wetting cycles on moisture behaviour of thermally modified Scots pine (Pinus sylvestris L.) wood

    Cermak, P., Vahtikari, K., Rautkari, L., Laine, K., Horacek, P. & Baar, J., Feb 2016, In : Journal of Materials Science. 51, 3, p. 1504-1511 8 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  21. Published

    Experimental phase stability investigation of compounds and thermodynamic assessment of the BaO–SiO2 binary system

    Zhang, R., Mao, H., Halli, P. & Taskinen, P., 2016, In : Journal of Materials Science. 51, 10, p. 4984-4995 12 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  22. 2015
  23. Published

    Composite films of nanofibrillated cellulose and O-acetyl galactoglucomannan (GGM) coated with succinic esters of GGM showing potential as barrier material in food packaging

    Kisonen, V., Prakobna, K., Xu, C., Salminen, A., Mikkonen, K. S., Valtakari, D., Eklund, P., Seppälä, J., Tenkanen, M. & Willför, S., 2015, In : Journal of Materials Science. 50, 8, p. 3189-3199 11 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  24. Published

    Physico-chemical properties of fractionated softwood kraft lignin and its potential use as a bio-based component in blends with polyethylene

    Alekhina, M., Erdmann, J., Ebert, A., Stepan, A. M. & Sixta, H., 2015, In : Journal of Materials Science. 50, 19, p. 6395-6406

    Research output: Contribution to journal › Article › Scientific › peer-review

  25. Published

    Sorption behaviour of torrefied wood and charcoal determined by dynamic vapour sorption

    Kymäläinen, M., Rautkari, L. & Hill, C. AS., 2015, In : Journal of Materials Science. 50, 23, p. 7673-7680 8 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  26. 2014
  27. Published

    A new approach for determining the hidden material parameters of a honeycomb

    Sjölund, J., Karakoc, A. & Freund, J., 2014, In : Journal of Materials Science. 49, 14, p. 4998-5005

    Research output: Contribution to journal › Article › Scientific › peer-review

  28. Published

    Micromorphological studies of surface densified wood

    Laine, K., Segerholm, K., Wålinder, M., Rautkari, L., Ormondroyd, G., Hughes, M. & Jones, D., 2014, In : Journal of Materials Science. 49, 5, p. 2027-2034 8 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  29. Published

    Thermodynamic properties of silver-palladium alloys determined by a solid state electrochemical method

    Feng, D. & Taskinen, P., 2014, In : Journal of Materials Science. 49, (16), p. 5790-5798

    Research output: Contribution to journal › Article › Scientific › peer-review

  30. 2013
  31. Published

    A model for a long-term diffusion of multispecies in concrete based on ion-cement-hydrate interaction

    Kari, O-P., Elakneswaran, Y., Nawa, T. & Puttonen, J., Jun 2013, In : Journal of Materials Science. 48, 12, p. 4243-4259 17 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  32. Published

    Crosslinking with ammonium zirconium carbonate improves the formation and properties of spruce galactoglucomannan films

    Mikkonen, K. S., Schmidt, J., Vesterinen, A-H. & Tenkanen, M., Jun 2013, In : Journal of Materials Science. 48, 12, p. 4205-4213 9 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  33. Published

    DC-conductivity testing combined with photometry for measuring fibre orientations in SFRC

    Eik, M., Lõhmus, K., Tigasson, M., Listak, M., Puttonen, J. & Herrmann, H., May 2013, In : Journal of Materials Science. 48, 10, p. 3745-3759 15 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  34. Published

    Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography

    Suuronen, J-P., Kallonen, A., Eik, M., Puttonen, J., Serimaa, R. & Herrmann, H., Feb 2013, In : Journal of Materials Science. 48, 3, p. 1358-1367 10 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  35. Published

    In situ fabrication of platinum/graphene composite shell on polymer microspheres through reactive self-assembly and in situ reduction

    Oh, J-S., Luong, N. D., Hwang, T-S., Hong, J-P., Lee, Y. K. & Nam, J-D., Feb 2013, In : Journal of Materials Science. 48, 3, p. 1127-1133 7 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  36. Published

    Cupping behaviour of surface densified Scots pine wood: the effect of process parameters and correlation with density profile characteristics

    Belt, T., Rautkari, L., Laine, K. & Hill, C. A. S., 2013, In : Journal of Materials Science. 48, 18, p. 6426-6430 5 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  37. Published

    Effect of strain and grain boundaries on dielectric properties in La0.7Sr0.3MnO3 thin films

    Majumdar, S., Huhtinen, H., Paturi, P. & Majumdar, H., 2013, In : Journal of Materials Science. 48, p. 2115-2122

    Research output: Contribution to journal › Article › Scientific › peer-review

  38. Published

    Electron doping of ALD-grown ZnO thin films through Al and P substitutions

    Tynell, T., Okazaki, R., Terasaki, I., Yamauchi, H. & Karppinen, M., 2013, In : Journal of Materials Science. 48, xx, p. 2806-2811

    Research output: Contribution to journal › Article › Scientific › peer-review

  39. Published

    FEM simulation of the hygro-thermal behaviour of wood under surface densification at high temperature

    Fortino, S., Genoese, A., Genoese, A. & Rautkari, L., 2013, In : Journal of Materials Science. 48, 21, p. 7603-7612 10 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  40. Published

    Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification

    Rautkari, L., Laine, K., Kutnar, A., Medved, S. & Hughes, M., 2013, In : Journal of Materials Science. 48, 6, p. 2370-2375 6 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  41. Published

    Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood

    Laine, K., Belt, T., Rautkari, L., Ramsay, J., Hill, C. AS. & Hughes, M., 2013, In : Journal of Materials Science. 48, 24, p. 8530-8538 9 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  42. Published

    What is the role of the accessibility of wood hydroxyl groups in controlling moisture content?

    Rautkari, L., Hill, C. A. S., Curling, S., Jalaludin, Z. & Ormondroyd, G., 2013, In : Journal of Materials Science. 48, 18, p. 6352-6356 5 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  43. 2012
  44. Published

    Defects in natural fibres: their origin, characteristics and implications for natural fibre reinforced composites

    Hughes, M., 2012, In : Journal of Materials Science. 47, 2, p. 599-609 11 p.

    Research output: Contribution to journal › Review Article › Scientific › peer-review

  45. Published

    The water vapour sorption properties of thermally modified and densified wood

    Hill, C. A. S., Ramsay, J., Keating, B., Laine, K., Rautkari, L., Hughes, M. & Constant, B., 2012, In : Journal of Materials Science. 47, 7, p. 3191-3197 7 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  46. Published

    Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose

    Bulota, M. & Hughes, M., 2012, In : Journal of Materials Science. 47, 14, p. 5517-5523 7 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  47. 2011
  48. Published

    Production of cellulose nanocrystals using hydrobromic acid and click reactions on their surface

    Sadeghifar, H., Filpponen, E., Clarke, SP., Brougham, DF. & Argyropoulos, DS., 2011, In : Journal of Materials Science. 46, 22, p. 7344-7355

    Research output: Contribution to journal › Article › Scientific › peer-review

  49. Published

    Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models

    Bulota, M., Jääskeläinen, A. S., Paltakari, J. & Hughes, M., 2011, In : Journal of Materials Science. 46, 10, p. 3387-3398 12 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  50. Published

    Surface modification of Scots pine: the effect of process parameters on the through thickness density profile

    Rautkari, L., Laine, K., Laflin, N. & Hughes, M., 2011, In : Journal of Materials Science. 46, 14, p. 4780-4786 7 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  51. Published

    The Combined Effects of Boron and oil Heat treatment on Beech and Scots Pine Wood Properties. Part 1: Boron Leaching, Thermogravimetric Analysis and Chemical Composition

    Tomak, E. D., Hughes, M., Yildiz, U. C. & Viitanen, H., 2011, In : Journal of Materials Science. 46, 3, p. 598-607 10 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  52. Published

    The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance

    Tomak, E. D., Viitanen, H., Yildiz, U. C. & Hughes, M., 2011, In : Journal of Materials Science. 46, 3, p. 608-615 8 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  53. 2010
  54. Published

    Starch granules spot-coated with aluminum silicate particles and their use as fillers for papermaking

    Koivunen, K., Alatalo, H., Silenius, P. & Paulapuro, H., 2010, In : Journal of Materials Science. 45, 12, p. 3184-3189

    Research output: Contribution to journal › Article › Scientific › peer-review

  55. 2009
  56. Published

    Measurement and Modelling of Heat Transfer in Paper Coating Structures

    Gerstner, P., Paltakari, J. & Gane, P. A. C., 2009, In : Journal of Materials Science. 44, 2, p. 483-491

    Research output: Contribution to journal › Article › Scientific › peer-review

  57. Published

    Novel nanostructured PCC fillers

    Koivunen, K., Niskanen, I., Peiponen, K-E. & Paulapuro, H., 2009, In : Journal of Materials Science. 44, 2, p. 477-482

    Research output: Contribution to journal › Article › Scientific › peer-review

  58. 2007
  59. Published

    Deformation and Fracture Behaviour of Flax Fibre Reinforced Thermosetting Polymer Matrix Composites

    Hughes, M., Carpenter, J. & Hill, C., 2007, In : Journal of Materials Science. 42, 7, p. 2499-2511 13 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

  60. Published

    Influence of de-icing agents on the viscoelastic properties of asphalt mastics

    Starck, P. & Löfgren, B., 2007, In : Journal of Materials Science. 42, 2, p. 676-685

    Research output: Contribution to journal › Article › Scientific › peer-review

  61. 2005
  62. Published

    Studying of salt diffusion coefficient in brick-Analytical and numerical methods

    Lu, X. & Ahl, J., 2005, In : Journal of Materials Science. 40, 14, p. 3795-3802

    Research output: Contribution to journal › Article › Scientific › peer-review

  63. 2004
  64. Published

    Salt diffusion in brick structures.Part II.The effect of temperature, concentration and salt.

    Ahl, J., 2004, In : Journal of Materials Science. 39, 13, p. 4247-4254

    Research output: Contribution to journal › Article › Scientific › peer-review

  65. 2003
  66. Published

    Effects of Surface Treatments on the Adhesion of Copper Metallization to Inorganic-Organic Hybrid Material

    Ge, J., Turunen, M., Kusevic, M. & Kivilahti, J., 2003, In : Journal of Materials Science. 18, 11, p. 2697-2707

    Research output: Contribution to journal › Article › Scientific › peer-review

Previous 1 2 Next

ID: 306967

Aalto University is a multidisciplinary university, where science and art meet technology and business.
Research Information
Privacy Notice