Journal of Materials Processing Technology

Research outputs

  1. 2019
  2. E-pub ahead of print
  3. 2017
  4. Published

    Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints

    Mehta, K. P. & Badheka, V. J., 1 Jan 2017, In : Journal of Materials Processing Technology. 239, p. 336-345 10 p.

    Research output: Contribution to journalArticle

  5. 2015
  6. Published

    Surface reinforcement of AA5083-H111 by friction stir processing assisted by electrical current

    Santos, T. G., Lopes, N., Machado, M., Vilaça, P. & Miranda, R. M., 2015, In : Journal of Materials Processing Technology. 216, 2, p. 375-380

    Research output: Contribution to journalArticle

  7. 2014
  8. Published

    Friction Stir Welding assisted by electrical Joule effect

    Santos, T. G., Miranda, R. M. & Vilaça, P., 2014, In : Journal of Materials Processing Technology. 214, 10, p. 2127-2133

    Research output: Contribution to journalArticle

  9. Published

    Friction Surfacing - a review

    Gandra, J., Miranda, R. M., Vilaça, P., Krohn, H., Beyer, M. & dos Santos, J. F., 2014, In : Journal of Materials Processing Technology. 214, 5, p. 1062-1093

    Research output: Contribution to journalArticle

  10. Published

    Wear behaviour of steel coatings produced by friction surfacing

    Pereira, D., Gandra, J., Pamies-Teixeira, J., Miranda, R. M. & Vilaça, P., 2014, In : Journal of Materials Processing Technology. 214, 12, p. 2858-2868

    Research output: Contribution to journalArticle

  11. 2009
  12. Published
  13. Published

    Thermal expansion of silicon at temperatures up to 1100 C°

    Mazur, A. V. & Gasik, M., 2009, In : Journal of Materials Processing Technology. 209, 2, p. 723-727

    Research output: Contribution to journalArticle

  14. 2006
  15. Published

    Analysis of flash formation in continuous rotary extrusion of copper

    Manninen, T., Katajarinne, T. & Ramsay, P., 2006, In : Journal of Materials Processing Technology. 177, p. 600-603

    Research output: Contribution to journalArticle

  16. Published

    Numerical simulation of flash formation in continuous rotary extrusion of copper

    Katajarinne, T., Manninen, T. & Ramsay, P., 2006, In : Journal of Materials Processing Technology. 177, p. 604-607

    Research output: Contribution to journalArticle

  17. 2004
  18. Published

    Drilling of conventional cast stainless steel with HIPed NiTi coating

    Paro, J. A., Gustafsson, T. E. & Koskinen, J., 10 Nov 2004, In : Journal of Materials Processing Technology. 153-154, p. 622-629 8 p.

    Research output: Contribution to journalArticle

  19. Published

    Drilling of X2CrNi 19 11 stainless steel with hiped NiTi coating

    Paro, J. A., Gustafsson, T. E. & Koskinen, J., 20 Jul 2004, In : Journal of Materials Processing Technology. 150, 3, p. 309-316 8 p.

    Research output: Contribution to journalArticle

  20. 2003
  21. Published
  22. 2001
  23. Published

    Tool wear and machinability of X5 CrMnN 18 18 stainless steels

    Paro, J., Hänninen, H. & Kauppinen, V., 20 Dec 2001, In : Journal of Materials Processing Technology. 119, 1-3, p. 14-20 7 p.

    Research output: Contribution to journalArticle

  24. Published
  25. Published

    The effect of silicon and vanadium alloying on the microstructu re of air cooled forged HSLA steels

    Holappa, L., Ollilainen, V. & Kasprzak, W., 2001, In : Journal of Materials Processing Technology. 109, p. 78-82

    Research output: Contribution to journalArticle

  26. 2000
  27. Published

    Logistics from IMS towards virtual factory

    Cser, L., Cselenyi, J., Geiger, M., Mäntylä, M. & Korhonen, A. S., 2000, In : Journal of Materials Processing Technology. 103, p. 6-13

    Research output: Contribution to journalArticle

  28. 1998
  29. Published

    A study on the canses of deviation in mechanical properties of thin steel sheets

    Myllykoski, P., 1998, In : Journal of Materials Processing Technology. 79, p. 9-13

    Research output: Contribution to journalArticle

  30. Published

    The role of neural networks in the optimisation of rolling processes

    Larkiola, J., Myllykoski, P., Korhonen, A. & Cser, L., 1998, In : Journal of Materials Processing Technology. 80-81, p. 16-23

    Research output: Contribution to journalArticle

  31. 1996
  32. Published

    Comparison of grindability of HIPped austenitic 316L, duplex 2205 and super duplex 2507 and as-cast 304 stainless steels using alumina wheels

    Jiang, L., Paro, J., Hänninen, H., Kauppinen, V. & Oraskari, R., Nov 1996, In : Journal of Materials Processing Technology. 62, 1-3, p. 1-9 9 p.

    Research output: Contribution to journalArticle

  33. Published
  34. Published

    Development of prediction model for mechanical properties of batch annealed thin steel strips

    Myllykoski, P., Larkiola, J. & Nylander, J., 1996, In : Journal of Materials Processing Technology. 60, p. 399-404

    Research output: Contribution to journalArticle

  35. Published

    Effect of the heat-transfer coefficient in ring-compression test

    Andersson, K., Kivivuori, S. & Korhonen, A. S., 1996, In : Journal of Materials Processing Technology. 62, p. 10-13

    Research output: Contribution to journalArticle

  36. Published

    Prediction of rolling force in cold rolling by using physical models and neural computing

    Larkiola, J., Myllykoski, P., Nylander, J. & Korhonen, A. S., 1996, In : Journal of Materials Processing Technology. 60, p. 381-386

    Research output: Contribution to journalArticle

  37. 1995
  38. Published

    High-speed milling in tooling production

    Paro, J., Nieminen, I. & Kauppinen, V., 1995, In : Journal of Materials Processing Technology. 52, 1, p. 27-34

    Research output: Contribution to journalArticle

  39. Published

    Recent Advances in Metal Matrix Composites

    Lindroos, V. & Talvitie, M., 1995, In : Journal of Materials Processing Technology. 53, p. 273-284

    Research output: Contribution to journalArticle

  40. 1994
  41. Published

    Comparison of two commercial FEM codes in cold extrusion simulation

    Reinikainen, T., Welo, T., Korhonen, A. S. & Kivivuori, S., 1994, In : Journal of Materials Processing Technology. 42, p. 137-146

    Research output: Contribution to journalArticle

  42. Published

    Improvement in Drawability of High Carbon Wire Rod

    Nordel, K., Pohjala, L. & Rastas, M., 1994, In : Journal of Materials Processing Technology. 45, p. 557-561

    Research output: Contribution to journalArticle

  43. 1992
  44. Published

    Finite-element analysis of copper extrusion processes

    Andersson, K., Kivivuori, S., Korhonen, A. S. & Reinikainen, T., 1992, In : Journal of Materials Processing Technology. 34, p. 101-108

    Research output: Contribution to journalArticle

  45. Published

    Hot wear resistance of TiN-coated mould and tool materials

    Kivivuori, S. O., Korhonen, A. S. & Pishow, K., 1992, In : Journal of Materials Processing Technology. 32, p. 55-64

    Research output: Contribution to journalArticle

ID: 306943