IEEE Transactions on Industry Applications

Research outputs

  1. 2019
  2. Published

    Stator-flux-oriented control of synchronous motors: A systematic design procedure

    Awan, H. A. A., Hinkkanen, M., Bojoi, R. & Pellegrino, G., 9 Jul 2019, In : IEEE Transactions on Industry Applications. 55, 5, p. 4811-4820 10 p.

    Research output: Contribution to journalArticle

  3. Published

    Flux-Linkage-Based Current Control of Saturated Synchronous Motors

    Awan, H. A. A., Saarakkala, S. E. & Hinkkanen, M., 27 May 2019, In : IEEE Transactions on Industry Applications. 55, 5, p. 4762-4769 8 p.

    Research output: Contribution to journalArticle

  4. 2018
  5. Published

    Optimal torque control of saturated synchronous motors: plug-and-play method

    Awan, H., Song, Z., Saarakkala, S. E. & Hinkkanen, M., 2 Aug 2018, In : IEEE Transactions on Industry Applications. 54, 6, p. 6110-6120

    Research output: Contribution to journalArticle

  6. Published

    Observers for sensorless synchronous motor drives: framework for design and analysis

    Hinkkanen, M., Saarakkala, S. E., Awan, H. A. A., Mölsä, E. & Tuovinen, T., 23 Jul 2018, In : IEEE Transactions on Industry Applications. 54, 6, p. 6090-6100

    Research output: Contribution to journalArticle

  7. Published

    Advanced analysis of motor currents for the diagnosis of the rotor condition in electric motors operating in mining facilities

    Antonino-Daviu, J., Quijano-Lopez, A., Rubbiolo, M. & Climente-Alarcon, V., Jul 2018, In : IEEE Transactions on Industry Applications. 54, 4, p. 3934-3942 9 p.

    Research output: Contribution to journalArticle

  8. Published

    2-D Magnetomechanical Transient Study of a Motor Suffering a Bar Breakage

    Climente-Alarcon, V., Arkkio, A. & Antonino-Daviu, J., 2018, In : IEEE Transactions on Industry Applications. 54, 3, p. 2097-2104

    Research output: Contribution to journalArticle

  9. Published

    Evaluation of the detectability of electromechanical faults in induction motors via transient analysis of the stray flux

    Ramirez-Nunez, J. A., Antonino-Daviu, J., Climente-Alarcon, V., Quijano-Lopez, A., Razik, H., Osornio-Rios, R. A. & Romero-Troncoso, R. J., 2018, In : IEEE Transactions on Industry Applications. 54, 5, p. 4324 - 4332 9 p.

    Research output: Contribution to journalArticle

  10. Published
  11. 2017
  12. Published

    Combined Model for Simulating the Effect of Transients on a Damaged Rotor Cage

    Climente-Alarcon, V., Nair, D., Sundaria, R., Antonino-Daviu, J. A. & Arkkio, A., 1 Jul 2017, In : IEEE Transactions on Industry Applications. 53, 4, p. 3528-3537 10 p., 7892870.

    Research output: Contribution to journalArticle

  13. Published

    Model Order Reduction of Electrical Machines with Multiple Inputs

    Farzamfar, M., Belahcen, A., Rasilo, P., Clénet, S. & Pierquin, A., 1 Jul 2017, In : IEEE Transactions on Industry Applications. 53, 4, p. 3355-3360 6 p., 7878567.

    Research output: Contribution to journalArticle

  14. Published

    Sensorless Self-Commissioning of Synchronous Reluctance Motors at Standstill Without Rotor Locking

    Hinkkanen, M., Pescetto, P., Mölsä, E., Saarakkala, S. E., Pellegrino, G. & Bojoi, R., 18 May 2017, In : IEEE Transactions on Industry Applications. 53, 3, p. 2120-2129 10 p.

    Research output: Contribution to journalArticle

  15. Published

    Identification of Magnetic Properties for Cutting Edge of Electrical Steel Sheets

    Holopainen, T. P., Rasilo, P. & Arkkio, A., 1 Mar 2017, In : IEEE Transactions on Industry Applications. 53, 2, p. 1049 - 1053 5 p.

    Research output: Contribution to journalArticle

  16. Published

    Reliable Detection of Rotor Winding Asymmetries in Wound Rotor Induction Motors via Integral Current Analysis

    Antonino-Daviu, J., Lopez, A. Q., Climente-Alarcon, V. & Garin-Abellan, C., 22 Feb 2017, In : IEEE Transactions on Industry Applications. 53, 3, p. 2040-2048 9 p.

    Research output: Contribution to journalArticle

  17. Published

    Analysis of the Vibration Magnitude of an Induction Motor With Different Numbers of Broken Bars

    Martinez, J., Belahcen, A. & Muetze, A., 2017, In : IEEE Transactions on Industry Applications. 53, 3, p. 2711-2720

    Research output: Contribution to journalArticle

  18. Published

    Reduced Basis Finite Element Modeling of Electrical Machines with Multiconductor Windings

    Lehikoinen, A., Arkkio, A. & Belahcen, A., 2017, In : IEEE Transactions on Industry Applications. 53, 5, p. 4252-4259 8 p., 7907188.

    Research output: Contribution to journalArticle

  19. 2016
  20. Published

    Downsizing Effects of Integrated Magnetic Components in High Power Density DC-DC Converters for EV and HEV Applications

    Kimura, S., Itoh, Y., Martinez, W., Yamamoto, M. & Imaoka, J., 1 Jul 2016, In : IEEE Transactions on Industry Applications. 52, 4, p. 3294-3305 12 p.

    Research output: Contribution to journalArticle

  21. Published

    Space-Vector Models for Torsional Vibration of Cage Induction Motors

    Arkkio, A. & Holopainen, T. P., 1 Jul 2016, In : IEEE Transactions on Industry Applications. 52, 4, p. 2988-2995 8 p., 7442111.

    Research output: Contribution to journalArticle

  22. Published
  23. Published

    Discrete-time observer design for sensorless synchronous motor drives

    Awan, H. A. A., Tuovinen, T., Saarakkala, S. E. & Hinkkanen, M., 24 May 2016, In : IEEE Transactions on Industry Applications. 52, 5, p. 3968-3979

    Research output: Contribution to journalArticle

  24. Published

    Current control for synchronous motor drives: Direct discrete-time pole-placement design

    Hinkkanen, M., Awan, H. A. A., Qu, Z., Tuovinen, T. & Briz, F., 17 Mar 2016, In : IEEE Transactions on Industry Applications. 52, 2, p. 1530-1541

    Research output: Contribution to journalArticle

  25. Published

    New preemptive arc-fault detection techniques in medium-voltage switchgear and motor controls

    Kay, J. A., Hussain, G. A., Lehtonen, M. & Kumpulainen, L., 1 Jan 2016, In : IEEE Transactions on Industry Applications. 52, 1, p. 740-750 11 p., 7185430.

    Research output: Contribution to journalArticle

  26. 2015
  27. Published
  28. Published
  29. Published

    Preemptive Arc Fault Detection Techniques in Switchgear - Part III: From the Laboratory to Practical Installation

    Hussain, G. A., Shafiq, M., Kay, J. A. & Lehtonen, M., 1 May 2015, In : IEEE Transactions on Industry Applications. 51, 3, p. 2615-2623 9 p., 6923467.

    Research output: Contribution to journalArticle

  30. Published

    Combination of Noninvasive Approaches for General Assessment of Induction Motors

    Picazo-Ródenas, M. J., Antonino-Daviu, J., Climente-Alarcon, V., Royo-Pastor, R. & Mota-Villar, A., 2015, In : IEEE Transactions on Industry Applications. 51, 3, p. 2172

    Research output: Contribution to journalArticle

  31. Published

    Diagnosis of Induction Motors Under Varying Speed Operation by Principal Slot Harmonic Tracking

    Climente-Alarcon, V., Antonino-Daviu, J. A., Haavisto, A. & Arkkio, A., 2015, In : IEEE Transactions on Industry Applications. 51, 5, p. 3591

    Research output: Contribution to journalArticle

  32. Published

    Pre-Emptive Arc Fault Detection Techniques in Switchgear- Part III, From the Laboratory to Practical Installation

    Hussain, G. A., Shafiq, M., Kay, J. A. & Lehtonen, M., 2015, In : IEEE Transactions on Industry Applications. 51, 3, p. 2615-2623

    Research output: Contribution to journalArticle

  33. Published

    Transient-Based Rotor Cage Assessment in Induction Motors Operating With Soft Starters

    Corral-Hernandez, J. A., Antonino-Daviu, J., Pons-Llinares, J., Climente-Alarcon, V. & Frances-Galiana, V., 2015, In : IEEE Transactions on Industry Applications. 51, 5, p. 3734-3742

    Research output: Contribution to journalArticle

  34. 2014
  35. Published

    Gain scheduling of a full-order observer for sensorless induction motor drives

    Qu, Z., Hinkkanen, M. & Harnefors, L., 20 Nov 2014, In : IEEE Transactions on Industry Applications. 50, 6, p. 3834-3845

    Research output: Contribution to journalArticle

  36. Published
  37. Published
  38. Published
  39. Published
  40. Published

    Harmonic compensation analysis in offshore wind power plants using hybrid filters

    Hasan, K. N. B. M., Rauma, K., Luna, A., Candela, J. I. & Rodríguez, P., 2014, In : IEEE Transactions on Industry Applications. 50, 3, p. 2050-2060 11 p., 6636033.

    Research output: Contribution to journalArticle

  41. Published

    Preemptive Arc-Fault Detection Techniques in Switchgear and Controlgear-Part II

    Hussain, G. A., Kumpulainen, L., Lehtonen, M. & Kay, J. A., 2014, In : IEEE Transactions on Industry Applications. 50, 3, p. 1649-1658 10 p.

    Research output: Contribution to journalArticle

  42. Published

    Pre-Emptive Arc Fault Detection Techniques in Switchgear and Controlgear - Part II

    Hussain, G. A., Kumpulainen, L., Lehtonen, M. & Kay, J. A., 2014, In : IEEE Transactions on Industry Applications. 50, 3, p. 1649-1658

    Research output: Contribution to journalArticle

  43. 2013
  44. Published

    Online identification of parameters defining the saturation characteristics of induction machines

    Ranta, M. & Hinkkanen, M., 16 Sep 2013, In : IEEE Transactions on Industry Applications. 49, 5, p. 2136-2145

    Research output: Contribution to journalArticle

  45. Published

    Speed control of electrical drives using classical control methods

    Harnefors, L., Saarakkala, S. E. & Hinkkanen, M., 1 Feb 2013, In : IEEE Transactions on Industry Applications. 49, 2, p. 889-898

    Research output: Contribution to journalArticle

  46. Published

    Analysis and design of a position observer with resistance adaptation for synchronous reluctance motor drives

    Tuovinen, T., Hinkkanen, M. & Luomi, J., 16 Jan 2013, In : IEEE Transactions on Industry Applications. 49, 1, p. 66-73

    Research output: Contribution to journalArticle

  47. Published

    Pre-Emptive Arc Fault Detection Techniques in Switchgear and Controlgear

    Kumpulainen, L., Hussain, G. A., Lehtonen, M. & Kay, J. A., 2013, In : IEEE Transactions on Industry Applications. 49, 4, p. 1911-1919

    Research output: Contribution to journalArticle

  48. Published

    Three-dimensional Eddy Current Analysis in Steel Lamination of Electrical Machines as a Contribution for Improved Iron Loss Modeling

    Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2013, In : IEEE Transactions on Industry Applications. 49, 5, p. 2044-2052

    Research output: Contribution to journalArticle

  49. 2012
  50. Published

    Comparison of a reduced-order observer and a full-order observer for sensorless synchronous motor drives

    Tuovinen, T., Hinkkanen, M., Harnefors, L. & Luomi, J., 31 Dec 2012, In : IEEE Transactions on Industry Applications. 48, 6, p. 1959-1967 9 p.

    Research output: Contribution to journalArticle

  51. Published

    Loss-minimizing flux level control of induction motor drives

    Qu, Z., Ranta, M., Hinkkanen, M. & Luomi, J., 15 May 2012, In : IEEE Transactions on Industry Applications. 48, 3, p. 952-961

    Research output: Contribution to journalArticle

  52. 2010
  53. Published

    Modeling of saturation due to main and leakage flux interaction in induction machines

    Tuovinen, T., Hinkkanen, M. & Luomi, J., 18 May 2010, In : IEEE Transactions on Industry Applications. 46, 3, p. 937-945

    Research output: Contribution to journalArticle

  54. Published

    Small-signal modeling of mutual saturation in induction machines

    Hinkkanen, M., Repo, A-K., Ranta, M. & Luomi, J., 18 May 2010, In : IEEE Transactions on Industry Applications. 46, 3, p. 965-973

    Research output: Contribution to journalArticle

  55. 2009
  56. Published

    Adaptation of motor parameters in sensorless PMSM drives

    Piippo, A., Hinkkanen, M. & Luomi, J., 20 Jan 2009, In : IEEE Transactions on Industry Applications. 45, 1, p. 203-212 10 p.

    Research output: Contribution to journalArticle

  57. Published

    Efficiency optimization of a 100-W 500 000-r/min permanent-magnet machine including air-friction losses

    Luomi, J., Zwyssig, C., Looser, A. & Kolar, J., 2009, In : IEEE Transactions on Industry Applications. 45, 4, p. 1368-1377

    Research output: Contribution to journalArticle

  58. 2008
  59. Published

    Influence of inverter output filter on maximum torque and speed of PMSM drives

    Salomäki, J., Hinkkanen, M. & Luomi, J., 22 Jan 2008, In : IEEE Transactions on Industry Applications. 44, 1, p. 153-160

    Research output: Contribution to journalArticle

  60. Published

    Signal injection in sensorless PMSM drives equipped with inverter output filter

    Piippo, A., Salomäki, J. & Luomi, J., 2008, In : IEEE Transactions on Industry Applications. 44, 5, p. 1614-1620

    Research output: Contribution to journalArticle

  61. 2006
  62. Published
Previous 1 2 Next

ID: 259295