Fuel Processing Technology

Research outputs

  1. 2019
  2. Published

    Slagging and fouling characteristics during co-combustion of Scots pine bark with low-temperature dried pulp and paper mill chemical sludge

    Grimm, A., Etula, J., Salh, R., Kalén, G., Segerström, M., Brücher, J., Söderberg, C., Soukup, D., Pfeifer, C. & Larsson, S. H., 1 Oct 2019, In : Fuel Processing Technology. 193, p. 282-294 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2018
  4. Published

    Fast furfural formation from xylose using solid acid catalysts assisted by a microwave reactor

    Gómez Millán, G., El Assal, Z., Nieminen, K., Hellsten, S., Llorca, J. & Sixta, H., 15 Dec 2018, In : Fuel Processing Technology. 182, p. 56-67 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 2017
  6. Published
  7. Published

    Drying recycled fiber rejects in a bench-scale cyclone: Influence of device geometry and operational parameters on drying mechanisms

    Grimm, A., Elustondo, D., Mäkelä, M., Segerström, M., Kalén, G., Fraikin, L., Léonard, A. & Larsson, S. H., 1 Dec 2017, In : Fuel Processing Technology. 167, p. 631-640 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Influence of input waste feedstock on solid recovered fuel production in a mechanical treatment plant

    Nasrullah, M., Hurme, M., Oinas, P., Hannula, J. & Vainikka, P., 1 Aug 2017, In : Fuel Processing Technology. 163, p. 35-44 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. 2015
  10. Published

    Upgrading of soot sludge from waste to fuel by means of low temperature drying in fixed beds

    Myllymaa, T., Holmberg, H., Arhippainen, P. & Ahtila, P., 2015, In : Fuel Processing Technology. 138, p. 509-519

    Research output: Contribution to journalArticleScientificpeer-review

  11. 2013
  12. Published

    Assessment test for glycol loss in gaseous system

    Gharagheizi, F., Eslamimanesh, A., Mohammadi, A. H., Eskandari, S. & Richon, D., Nov 2013, In : Fuel Processing Technology. 115, p. 254-260 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Assessment test of sulfur content of gases

    Eslamimanesh, AL., Charagheizi, F., Mohammadi, AM. H. & Richon, D., 2013, In : Fuel Processing Technology. 10, p. 133-140

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2012
  15. Published

    Comparison of the forest fertilizer properties of ash fractions from two power plants of pulp and paper mills incinerating biomass-based fuels

    Nurmesniemi, H., Mäkelä, M., Pöykiö, R., Manskinen, K. & Dahl, O., 2012, In : Fuel Processing Technology. 104, p. 1-6

    Research output: Contribution to journalArticleScientificpeer-review

  16. 2011
  17. Published

    Precious metal catalysts in the clean-up of biomass gasification gas part 2: Performance and sulfur tolerance of rhodium based catalysts

    Ronkkonen, H., Simell, P., Niemela, M. & Krause, O., Oct 2011, In : Fuel Processing Technology. 92, 10, p. 1881-1889 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Precious metal catalysts in the clean-up of biomass gasification gas Part 1: Monometallic catalysts and their impact on gasification gas composition

    Ronkkonen, H., Simell, P., Reinikainen, M., Niemelä, M. & Krause, O., Aug 2011, In : Fuel Processing Technology. 92, 8, p. 1457-1465 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Total and extractable element concentrations in bed sand material from a medium-sized (32 MW) municipal district heating plant incinerating peat, stumps, sawdust and recycled wood

    Watkins, G., Pöykiö, R., Nurmesniemi, H., Dahl, O. & Mäkelä, M., 2011, In : Fuel Processing Technology. 92, 6, p. 1195-1202

    Research output: Contribution to journalArticleScientificpeer-review

  20. 2010
  21. Published

    Heavy metal concentrations in bottom ash and fly ash fractions from a large-sized (246 MW) fluidized bed boiler with respect to their Finnish forest fertilizer limit values

    Dahl, O., Nurmesniemi, H., Pöykiö, R. & Watkins, G., 2010, In : Fuel Processing Technology. 91, 11, p. 1634-1639

    Research output: Contribution to journalArticleScientificpeer-review

  22. 2009
  23. Published

    Comparison of the characteristics of bottom ash and fly ash from a medium-size (32 MW) municipal district heating plant incinerating forest residues and peat in a fluidized-bed boiler

    Dahl, O., Nurmesniemi, H., Poykio, R. & Watkins, G., 2009, In : Fuel Processing Technology. 90, 7-8, p. 871-878

    Research output: Contribution to journalArticleScientificpeer-review

  24. 2008
  25. Published

    Emissions from large-scale medium-speed diesel engines: 1.Influence of engine operation mode and turbocharger

    Sarvi, A., Fogelholm, C-J. & Zevenhoven, R., 2008, In : Fuel Processing Technology. 89, 5, p. 510-519

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Emissions from large-scale medium-speed diesel engines: 2.Influence of fuel type and operating mode

    Sarvi, A., Fogelholm, C-J. & Zevenhoven, R., 2008, In : Fuel Processing Technology. 89, 5, p. 520-527

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2005
  28. Published

    Corrosion studies with a new laboratory-scale system simulating large-scale diesel engines operating with residual fuels - Part I: corrosion of Nimonic 80 A samples

    Lyyränen, J., Jokiniemi, J., Kauppinen, E. I. & Silvonen, A., 2005, In : Fuel Processing Technology. 86, 4, p. 353-373

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Corrosion studies with a new laboratory-scale system simulating large-scale diesel engines operating with residual fuels - Part II: particle and deposit characteristics

    Lyyränen, J., Jokiniemi, J., Kauppinen, E. I. & Silvonen, A., 2005, In : Fuel Processing Technology. 86, 4, p. 329-352

    Research output: Contribution to journalArticleScientificpeer-review

  30. 2004
  31. Published

    Cement manufacturing using alternative fuels and the advantages of process modelling

    Kääntee, U., Zevenhoven, R., Backman, R. & Hupa, M., 2004, In : Fuel Processing Technology. 85, 4, p. 293-301

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Pyrolysis and combustion of PVC, PVC-wood and PVC-coal mixtures in a two-stage fluidized bed process

    Saeed, L., Tohka, A., Haapala, M. & Zevenhoven, R., 2004, In : Fuel Processing Technology. 85, 14, p. 1565-1583

    Research output: Contribution to journalArticleScientificpeer-review

  33. 1997
  34. Published

    A study of trace element behaviour in two modern coal-fired power plants I

    Hatanpää, E., Kajander, K., Laitinen, T., Piepponen, S. & Revitzer, H., 1997, In : Fuel Processing Technology. 51, p. 205-217

    Research output: Contribution to journalArticleScientificpeer-review

ID: 245258