European Journal of Wood and Wood Products

Research outputs

  1. 2019
  2. Published

    Bending performance of nail-laminated timber constructed of fast-grown plantation eucalypt

    Derikvand, M., Jiao, H., Kotlarewski, N., Lee, M., Chan, A. & Nolan, G., 1 May 2019, In : European Journal of Wood and Wood Products. 77, 3, p. 421-437

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2018
  4. Published

    Determining the degree of heat treatment of wood by light polarization technique

    Soetedjo, H., Niskanen, I., Rautkari, L., Altgen, M., Hiltunen, E., Thungström, G., Zakrisson, D. & Räty, J., 1 Jul 2018, In : European Journal of Wood and Wood Products. 76, 4, p. 1359-1362 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Exploring an oxidative bleaching treatment for Chilean bamboo: a source of cellulose for biofuel generation and the nanotech industry

    Oliveira, P. E., Pesenti, H., Cunha, A. G., Gacitúa, W. & Petit-Breuilh, X., May 2018, In : European Journal of Wood and Wood Products. 76, 3, p. 1009-1019 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. 2017
  7. Published

    Quasi-brittle fracture and size effect of glued laminated timber beams

    Blank, L., Fink, G., Jockwer, R. & Frangi, A., Sep 2017, In : European Journal of Wood and Wood Products. 75, 5, p. 667-681 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Influence of temperature of thermal treatment on surface densification of spruce

    Kariz, M., Kuzman, M. K., Sernek, M., Hughes, M., Rautkari, L., Kamke, F. A. & Kutnar, A., Jan 2017, In : European Journal of Wood and Wood Products. 75, 1, p. 113-123 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. 2016
  10. Published

    Surface densification of acetylated wood

    Laine, K., Segerholm, K., Wålinder, M., Rautkari, L., Hughes, M. & Lankveld, C., 1 Nov 2016, In : European Journal of Wood and Wood Products. 74, November, p. 829-835 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Wood degradation affected by process conditions during thermal modification of European beech in a high-pressure reactor system

    Altgen, M., Willems, W. & Militz, H., 1 Sep 2016, In : European Journal of Wood and Wood Products. 74, 5, p. 653-662 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Photodegradation of thermally-modified Scots pine and Norway spruce investigated on thin micro-veneers

    Altgen, M. & Militz, H., 1 Mar 2016, In : European Journal of Wood and Wood Products. 74, 2, p. 185-190 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. 2015
  14. Published

    Fungal colonisation and moisture uptake of torrefied wood, charcoal, and thermally treated pellets during storage

    Kymäläinen, M., Mäkelä, M., Hildén, K. & Kukkonen, J., Nov 2015, In : European Journal of Wood and Wood Products. 73, 6, p. 709-717 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Probabilistic modelling of the tensile related material properties of timber boards and finger joint connections

    Fink, G. & Kohler, J., May 2015, In : European Journal of Wood and Wood Products. 73, 3, p. 335-346 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Comparison of the accuracy of two on-line industrial veneer moisture content and density measurement systems

    Antikainen, T., Rohumaa, A., Hughes, M. & Kairi, M., 2015, In : European Journal of Wood and Wood Products. 73, 1, p. 61-68 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Estimating birch veneer (Betula pendula Roth) moisture content using infrared technology

    Antikainen, T., Rohumaa, A., Bulota, M., Kotilahti, T. & Hughes, M., 2015, In : European Journal of Wood and Wood Products. 73, 5, p. 617-625 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence

    Antikainen, T., Rohumaa, A., Hunt, C. G., Levirinne, M. & Hughes, M., 2015, In : European Journal of Wood and Wood Products. 73, 1, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Life cycle assessment of wood construction according to the normative standards

    Takano, A., Hafner, A., Linkosalmi, L., Ott, S., Hughes, M. & Winter, S., 2015, In : European Journal of Wood and Wood Products. 73, 3, p. 299-312 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. 2014
  21. Published

    Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C

    Rautkari, L., Honkanen, J., Hill, C. A. S., Ridley-Ellis, D. & Hughes, M., 2014, In : European Journal of Wood and Wood Products. 72, 1, p. 33-41 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Model for the prediction of the tensile strength and tensile stiffness of knot clusters within structural timber

    Fink, G. & Kohler, J., 2014, In : European Journal of Wood and Wood Products. 72, 3, p. 331-341 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. 2013
  24. Published

    Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment

    Laine, K., Rautkari, L., Hughes, M. & Kutnar, A., 2013, In : European Journal of Wood and Wood Products. 71, 1, p. 17-23 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies

    Dupleix, A., Denaud, L-E., Bleron, L., Marchal, R. & Hughes, M., 2013, In : European Journal of Wood and Wood Products. 71, 2, p. 163-171 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    The effect of process parameters on the hardness of surface densified Scots pine solid wood

    Laine, K., Rautkari, L. & Hughes, M., 2013, In : European Journal of Wood and Wood Products. 71, 1, p. 13-16 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2012
  28. Published

    Thermodynamic characteristics of surface densified solid Scots pine wood

    Kutnar, A., Rautkari, L., Laine, K. & Hughes, M., 2012, In : European Journal of Wood and Wood Products. 70, 5, p. 727-734 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2011
  30. Published

    Pine heartwood and glass surfaces: easy method to test the fate of bacterial contamination

    Vainio-Kaila, T., Kyyhkynen, A., Viitaniemi, P. & Siitonen, A., Aug 2011, In : European Journal of Wood and Wood Products. 69, 3, p. 391-395 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Potential error in density profile measurements for wood composites

    Rautkari, L., Kamke, F. A. & Hughes, M., 2011, In : European Journal of Wood and Wood Products. 69, 1, p. 167-169 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 237102