Composite Structures

Research outputs

  1. 2019
  2. Published

    Cross-section optimization of topologically-optimized variable-axial anisotropic composite structures

    Almeida, J. H. S., Bittrich, L., Nomura, T. & Spickenheuer, A., 1 Oct 2019, In : Composite Structures. 225, 111150.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Velocity gradients of concrete mass reconstructed based on measured fibre orientations in hardened concrete

    Eik, M. & Papenfuss, C., 1 Oct 2019, In : Composite Structures. 225, 111008.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout

    Almeida, J. H. S., Bittrich, L., Jansen, E., Tita, V. & Spickenheuer, A., 15 Aug 2019, In : Composite Structures. 222, 110928.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Waviness and fiber volume content analysis in continuous carbon fiber reinforced plastics made by tailored fiber placement

    Uhlig, K., Bittrich, L., Spickenheuer, A. & Almeida, J. H. S., 15 Aug 2019, In : Composite Structures. 222, 110910.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Isogeometric analysis for size-dependent nonlinear thermal stability of porous FG microplates

    Thanh, C. L., Tran, L. V., Bui, T. Q., Nguyen, H. X. & Abdel-Wahab, M., 1 Aug 2019, In : Composite Structures. 221, 14 p., 110838.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins

    Azzouz, L., Chen, Y., Zarrelli, M., Pearce, J. M., Mitchell, L., Ren, G. & Grasso, M., 1 Apr 2019, In : Composite Structures. 213, p. 220-230 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    A nonlinear couple stress model for periodic sandwich beams

    Reinaldo Goncalves, B., Karttunen, A. & Romanoff, J., 15 Mar 2019, In : Composite Structures. 212, p. 586-597 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Lower stiffness of GFRP after sulfuric acid-solution aging is due to degradation of fibre-matrix interfaces?

    Kanerva, M., Jokinen, J., Sarlin, E., Pärnänen, T., Lindgren, M., Järventausta, M. & Vuorinen, J., 15 Mar 2019, In : Composite Structures. 212, p. 524-534 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. 2018
  11. Published

    Shear-corrected Reissner-Mindlin plate model

    Freund, J., 8 Dec 2018, In : Composite Structures. 211, p. 144-153 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Stability analysis of multi-layered plates subjected to partial edge compression with and without initial imperfection

    Tran, L. V. & Kim, S. E., 1 Dec 2018, In : Composite Structures. 205, p. 26-41

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Stationary random response of non-viscously damped polymer matrix composite structure systems

    Liu, Q., Oct 2018, In : Composite Structures. 202, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Multiscale microstructural characterization of particulate-reinforced composite with non-destructive X-ray micro- and nanotomography

    Nafar Dastgerdi, J., Miettinen, A., Parkkonen, J. & Remes, H., 15 Jun 2018, In : Composite Structures. 194, p. 292-301 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Micropolar modeling approach for periodic sandwich beams

    Karttunen, A. T., Reddy, J. N. & Romanoff, J., 1 Feb 2018, In : Composite Structures. 185, p. 656-664 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    General analytical sensitivity analysis of composite laminated plates and shells for classical and first-order shear deformation theories

    Liu, Q. & Paavola, J., Jan 2018, In : Composite Structures. 183, 1, p. 21-34 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. 2017
  18. Published

    Stacking sequence optimization in composite tubes under internal pressure based on genetic algorithm accounting for progressive damage

    Almeida, J. H. S., Ribeiro, M. L., Tita, V. & Amico, S. C., 15 Oct 2017, In : Composite Structures. 178, p. 20-26 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Geometrical and spatial effects on fiber network connectivity

    Karakoç, A., Hiltunen, E. & Paltakari, J., 15 May 2017, In : Composite Structures. 168, p. 335-344 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Stress redistribution around clusters of broken fibres in a composite

    St-Pierre, L., Martorell, N. J. & Pinho, S. T., 15 May 2017, In : Composite Structures. 168, p. 226-233 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    The effect of matrix type on ageing of thick vinyl ester glass-fibre-reinforced laminates

    Sarlin, E., Sironen, R., Pärnänen, T., Lindgren, M., Kanerva, M. & Vuorinen, J., 15 May 2017, In : Composite Structures. 168, p. 840-850 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Buckling and free vibration of shear-flexible sandwich beams using a couple-stress-based finite element

    Reinaldo, G., Karttunen, A., Romanoff, J. & Reddy, J. N., 1 Apr 2017, In : Composite Structures. 165, p. 233-241 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression

    Almeida, J. H. S., Ribeiro, M. L., Tita, V. & Amico, S. C., 15 Jan 2017, In : Composite Structures. 160, p. 204-210 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. 2016
  25. Published

    Using non-local Timoshenko beam theories for prediction of micro- and macro-structural responses

    Romanoff, J., Reddy, J. N. & Jelovica, J., 15 Nov 2016, In : Composite Structures. 156, p. 410-420 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Fatigue crack growth behavior of amorphous particulate reinforced composites

    Nafar Dastgerdi, J., Marquis, G., Sankaranarayanan, S. & Gupta, M., 1 Oct 2016, In : Composite Structures. 153, p. 782-790 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    The effect of approximation accuracy of the orientation distribution function on the elastic properties of short fibre reinforced composites

    Eik, M., Puttonen, J. & Herrmann, H., 15 Jul 2016, In : Composite Structures. 148, p. 12-18 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Exact sensitivity analysis of stresses and lightweight design of Timoshenko composite beams

    Liu, Q., 20 May 2016, In : Composite Structures. 143, p. 272-286 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Microstructure-sensitive investigation on the plastic deformation and damage initiation of amorphous particles reinforced composites

    Nafar Dastgerdi, J., Marquis, G., Anbarlooie, B., Sankaranarayanan, S. & Gupta, M., 10 May 2016, In : Composite Structures. 142, p. 130-139 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    High temperature damping behavior and dynamic Young's modulus of AlSi-CNT-SiCp hybrid composite

    Carvalho, O., Miranda, G., Buciumeanu, M., Gasik, M., Silva, F. S. & Madeira, S., 2016, In : Composite Structures. 141, p. 155-162 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. 2015
  32. Published

    An orthotropic material model for steel fibre reinforced concrete based on the orientation distribution of fibres

    Eik, M., Puttonen, J. & Herrmann, H., Mar 2015, In : Composite Structures. 121, p. 324-336 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Analytical sensitivity analysis of eigenvalues and lightweight design of composite laminated beams

    Liu, Q., 2015, In : Composite Structures. 134, 15 December 2015, p. 918-926

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Bending deflection of sandwich beams considering local effect of concentrated force

    Cernescu, A. & Romanoff, J., 2015, In : Composite Structures. 134, December, p. 169-175

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Debonding and impact damage in stainless steel fibre metal laminates prior to metal fracture

    Pärnänen, T., Kanerva, M., Sarlin, E. & Saarela, O., 2015, In : Composite Structures. 119, Jan 2015, p. 777-786

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Lightweight design of composite laminated structures with frequency constraint

    Liu, Q. & Paavola, J., 2015, In : Composite Structures. 25 December 2015, p. 1-1

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Mechanical and real microstructure behavior analysis of particulate-reinforced nanocomposite considering debonding damage based on cohesive finite element method

    Nafar Dastgerdi, J., Anbarlooie, B., Marzban, S. & Marquis, G., 2015, In : Composite Structures. 122, p. 518-525

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    On the formula of sensitivity analysis of frequencies for composite structures in the paper

    Liu, Q., 2015, In : Composite Structures. 125, July 2015, p. 5859

    Research output: Contribution to journalArticleScientificpeer-review

  39. 2014
  40. Published

    An experimental study on the fatigue performance of CFRP and BFRP repaired aluminium plates

    Aakkula, J. & Saarela, O., 2014, In : Composite Structures. n/a, p. 589-599

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Equivalent mechanical properties for cylindrical cell honeycomb core structure

    Cernescu, A., Romanoff, J., Remes, H., Faur, N. & Jelovica, J., 2014, In : Composite Structures. 108, 1, p. 866-875

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Experimental validation of the modified couple stress Timoshenko beam theory for web-core sandwich panels

    Romanoff, J. & Reddy, J. N., 2014, In : Composite Structures. 111, May, p. 130-137

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Micromechanical modeling of nanocomposites considering debonding and waviness of reinforcements

    Nafar Dastgerdi, J., Marquis, G. & Salimi, M., 2014, In : Composite Structures. 110, n/a, p. 1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Periodic and Homogenized Bending Response of Faceplates of Filled Web-core Sandwich Beams

    Romanoff, J., 2014, In : Composite Structures. 113, July, p. 83-88

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2013
  46. Published

    A statistical failure initiation model for honeycomb materials

    Karakoc, A. & Freund, J., 2013, In : Composite Structures. 95, p. 154-162

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Experiments on the effective compliance in the radial-tangential plane of Norway spruce

    Karakoc, A., Tukiainen, P., Freund, J. & Hughes, M., 2013, In : Composite Structures. 102, p. 287-293 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Simulation experiments on the effective in-plane compliance of the honeycomb materials

    Karakoc, A., Santaoja, K. & Freund, J., 2013, In : Composite Structures.

    Research output: Contribution to journalArticleScientificpeer-review

  49. 2012
  50. Published

    Experimental studies on mechanical properties of cellular structures using Nomex honeycomb cores

    Karakoc, A. & Freund, J., 2012, In : Composite Structures. 94, p. 2017-2024

    Research output: Contribution to journalArticleScientificpeer-review

  51. 2007
  52. Published

    Bending response of web-core sandwich plates

    Romanoff, J. & Varsta, P., 2007, In : Composite Structures. 81, p. 292-302

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Stress analysis of homogenized web-core sandwich beams

    Romanoff, J., Varsta, P. & Klanac, A., 2007, In : Composite Structures. 79, p. 411-422

    Research output: Contribution to journalArticleScientificpeer-review

  54. 2006
  55. Published

    Bending response of web-core sandwich beams

    Romanoff, J. & Varsta, P., 2006, In : Composite Structures. 73, 4, p. 478-487

    Research output: Contribution to journalArticleScientificpeer-review

ID: 210809