Applied Thermal Engineering

Research outputs

  1. 2019
  2. Published

    Mass flow controlled district heating with an extract air heat pump in apartment buildings: A practical concept study

    Kuosa, M., Rahiala, S., Tallinen, K., Mäkilä, T., Lampinen, M., Lahdelma, R. & Pulkkinen, L., 5 Jul 2019, In : Applied Thermal Engineering. 157, 113745.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Airflow uniformity optimization for modular data center based on the constructal T-shaped underfloor air ducts

    Zhang, Y., Zhang, K., Liu, J., Kosonen, R. & Yuan, X., 5 Jun 2019, In : Applied Thermal Engineering. 155, p. 489-500 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. E-pub ahead of print

    A study on the fluid refrigerant charge in a Two-Phase Mechanically Pumped Loop system using R134a and R1234yf

    Pereira, L., Humia, G., Khosravi, A., Revellin, R., Bonjour, J., Machado, L. & Garcia Pabon, J. J., 9 May 2019, In : Applied Thermal Engineering. 113727.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Experimental investigation on performance of downhole electric heaters with continuous helical baffles used in oil shale in-situ pyrolysis

    Guo, W., Wang, Z., Sun, Z., Sun, Y., Lü, X., Deng, S., Qu, L., Yuan, W. & Li, Q., 25 Jan 2019, In : Applied Thermal Engineering. 147, p. 1024-1035 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    The Influence of Magnetic Field on Heat Transfer of Magnetic Nanofluid in a Double Pipe Heat Exchanger Proposed in a Small-Scale CAES System

    Malekan, M., Khosravi, A. & Zhao, X., 5 Jan 2019, In : Applied Thermal Engineering. 146, p. 146-159 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2018
  8. Published

    Computational Fluid Dynamics Modeling and Experimental Validation of Heat Transfer and Fluid Flow in the Recovery Boiler Superheater Region

    Maakala, V., Järvinen, M. & Vuorinen, V., 5 Jul 2018, In : Applied Thermal Engineering. 139, p. 222-238 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Interplant heat exchanger network synthesis using nanofluids for interplant heat exchange

    Laukkanen, T. & Seppälä, A., 5 May 2018, In : Applied Thermal Engineering. 135, p. 133-144 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Experimental analysis of emission efficiency of parallel and serial connected radiators in EN442 test chamber

    Võsa, K-V., Ferrantelli, A., Kull, T. M. & Kurnitski, J., 5 Mar 2018, In : Applied Thermal Engineering. 132, p. 531-544 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Multicriteria evaluation of carbon-neutral heat-only production technologies for district heating

    Kirppu, H., Lahdelma, R. & Salminen, P., 5 Feb 2018, In : Applied Thermal Engineering. 130, p. 466-476 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    A fuzzy-grey multicriteria decision making model for district heating system

    Wang, H., Duanmu, L., Lahdelma, R. & Li, X., 5 Jan 2018, In : Applied Thermal Engineering. 128, p. 1051-1061 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Exhaust air heat pump connection schemes and balanced heat recovery ventilation effect on district heat energy use and return temperature

    Thalfeldt, M., Kurnitski, J. & Latõšov, E., 5 Jan 2018, In : Applied Thermal Engineering. 128, p. 402-414 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2017
  15. Published

    A mathematical model for burning rate of n-heptane pool fires under external wind conditions in long passage connected to a shaft

    Ji, J., Yuan, X., Li, K., Yang, L. & Sun, J., 1 Apr 2017, In : Applied Thermal Engineering. 116, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Using waste heat of ship as energy source for an absorption refrigeration system

    Salmi, W., Vanttola, J., Elg, M., Kuosa, M. & Lahdelma, R., 25 Mar 2017, In : Applied Thermal Engineering. 115, p. 501-516 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    An experimental study of temperature and heat flux in a channel with an asymmetric thermal plume

    Fan, C. G., Zhang, J. Q., Zhu, K. J. & Li, K. Y., 25 Feb 2017, In : Applied Thermal Engineering. 113, p. 1128-1136 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Performance evaluation of oscillating flow regenerators filled with particles, wire screens and high porosity open-cell foams

    Peng, W., Xu, M., Huai, X., Liu, Z. & Lu-Tervola, X., 5 Feb 2017, In : Applied Thermal Engineering. 112, p. 1612-1625 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Dynamic heat transfer analysis of liquefied natural gas ambient air vaporizer under frost conditions

    Liu, S., Jiao, W., Ren, L., Wang, H. & Zhang, P., 5 Jan 2017, In : Applied Thermal Engineering. 110, p. 999-1006 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Low-temperature drying of industrial biosludge with simulated secondary heat

    Mäkelä, M., Edler, J. & Geladi, P., 1 Jan 2017, In : Applied Thermal Engineering. 116, p. 792-798 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. 2016
  22. Published

    Influence of aspect ratio of tunnel on smoke temperature distribution under ceiling in near field of fire source

    Ji, J., Bi, Y., Venkatasubbaiah, K. & Li, K., 5 Aug 2016, In : Applied Thermal Engineering. 106, p. 1094-1102 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. 2015
  24. Published

    Heat exchanger measurements in a mass flow controlled consumer substation connected to a ring network

    Iturralde, J., Kuosa, M., Mäkilä, T., Lampinen, M. & Lahdelma, R., 5 Nov 2015, In : Applied Thermal Engineering. 90, p. 733-741 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Analysis of the location for peak heating in CHP based combined district heating systems

    Wang, H., Lahdelma, R., Wang, X., Jiao, W., Zhu, C. & Zou, P., 5 Aug 2015, In : Applied Thermal Engineering. 87, p. 402-411 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    The correlation based zonal method and its application to the back pass channel of oxy/air-fired CFB boiler

    Bordbar, M. H. & Hyppänen, T., 5 Mar 2015, In : Applied Thermal Engineering. 78, p. 351-363 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Coupling of a radiative heat transfer model and a three-dimensional combustion model for a circulating fluidized bed furnace

    Bordbar, M. H., Myöhänen, K. & Hyppänen, T., 5 Feb 2015, In : Applied Thermal Engineering. 76, p. 344-356 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Heat transfer and flow analysis of jet impingement on concave surfaces

    Taghinia, J., Rahman, M. & Siikonen, T., 2015, In : Applied Thermal Engineering. n/a

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2014
  30. Published

    State estimation of district heating network based on customer measurements

    Fang, T. & Lahdelma, R., 5 Dec 2014, In : Applied Thermal Engineering. 73, 1, p. 1211-1221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Energy efficiency improvements utilising mass flow control and a ring topology in a district heating network

    Laajalehto, T., Kuosa, M., Mäkilä, T., Lampinen, M. & Lahdelma, R., Aug 2014, In : Applied Thermal Engineering. 69, 1-2, p. 86-95 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Analysis of a wooden pellet-fueled domestic thermoelectric cogeneration system

    Alanne, K., Laukkanen, T., Saari, K. & Jokisalo, J., 2014, In : Applied Thermal Engineering. 63, 1, p. 1-10

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    A temperature controller for high power light emitting diodes based on resistive heating and liquid cooling

    Baumgartner, H., Vaskuri, A., Kärhä, P. & Ikonen, E., 2014, In : Applied Thermal Engineering. 71

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Numerical investigation of twin-jet impingement with hybrid-type turbulence modeling

    Taghinia, J., Rahman, M. M. & Siikonen, T., 2014, In : Applied Thermal Engineering. 73, 1, p. 650-659

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Optimisation of functionally gradated material thermoelectric cooler for the solar space power system.

    Gasik, M. & Bilotsky, Y., 2014, In : Applied Thermal Engineering. 66, 1-2, p. 528-533

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published
  37. 2013
  38. Published

    Static study of traditional and ring networks and the use of mass flow control in district heating applications

    Kuosa, M., Kontu, K., Mäkilä, T., Lampinen, M. & Lahdelma, R., 30 May 2013, In : Applied Thermal Engineering. 54, 2, p. 450-459 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Combining simulation and on-line measurements to determine moisture transport dynamics throughout the heatset offset printing process

    Tåg, C-M., Rajala, P., Toiviainen, M., Juuti, M. & Gane, P. A. C., 2013, In : Applied Thermal Engineering. 50, 1, p. 1021-1028

    Research output: Contribution to journalArticleScientificpeer-review

  40. 2012
  41. Published

    Emergy evaluation of combined heat and power plant processes

    Sha, S. & Hurme, M., Oct 2012, In : Applied Thermal Engineering. 43, p. 67-74 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Bilevel heat exchanger network synthesis with an interactive multi-objective optimization method

    Laukkanen, T., Tveit, T-M., Ojalehto, V., Miettinen, K. & Fogelholm, C-J., 2012, In : Applied Thermal Engineering. 48, xx, p. 301-316

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Emergy evaluation of combined heat and power processes

    Sha, S. & Hurme, M., 2012, In : Applied Thermal Engineering. 43, p. 67-74

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Oscillating Flow in a Stirling Engine Heat Exchanger

    Kuosa, M., Saari, K., Kankkunen, A. & Tveit, T-M., 2012, In : Applied Thermal Engineering. 45-46, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Thermo-economic analysis of a micro-cogeneration system based on a rotary steam engine (RSE)

    Alanne, K., Saari, K., Kuosa, M., Jokisalo, J. & Martin, A. R., 2012, In : Applied Thermal Engineering. 44, p. 11-20

    Research output: Contribution to journalArticleScientificpeer-review

  46. 2011
  47. Published

    The potential for steam savings and implementation of different biorefinery concepts in Scandinavian integrated TMP and paper mills

    Jönsson, J., Ruohonen, P., Michel, G. & Berntsson, T., Sep 2011, In : Applied Thermal Engineering. 31, 13, p. 2107-2114 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. 2010
  49. Published

    Temperature optimisation of a diesel engine using exhaust gas heat recovery and thermal energy storage (diesel engine with thermal energy storage)

    Kauranen, P., Elonen, T., Wikström, L., Heikkinen, J. & Laurikko, J., May 2010, In : Applied Thermal Engineering. 30, 6-7, p. 631-638 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Optimisation model for integration of cooling and heating systems in large industrial plants

    Söderman, J. & Ahtila, P., Jan 2010, In : Applied Thermal Engineering. 30, 1, p. 15-22 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Analysis of a mechanical pulp and paper mill using advanced composite curves

    Ruohonen, P. & Ahtila, P., 2010, In : Applied Thermal Engineering. 30, 6-7, p. 649-657

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Evaluating the efficiency of integrated systems in the process industry Case: Steam cracker

    Tuomaala, M., Hurme, M. & Leino, A-M., 2010, In : Applied Thermal Engineering. 30, p. 45-52

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Indirect Evaporative Cooling of Air to a Sub-Wet Bulb Temperature

    Hasan, A., 2010, In : Applied Thermal Engineering. 30, 16, p. 2460-2468

    Research output: Contribution to journalArticleScientificpeer-review

  54. 2009
  55. Published

    Energy efficiency improvement of dryer section heat recovery systems in paper machines A case study

    Sivill, L. & Ahtila, P., 2009, In : Applied Thermal Engineering. 29, 17-18, p. 3663-3668

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Modelling and experimental investigation of a buoyant attached plane jet

    Cao, G., Kurnitski, J., Ruponen, M. & Seppänen, O., 2009, In : Applied Thermal Engineering. 29, 13-14, p. 2790-2798

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Multiphysics thermal design of a high-speed permanent-magnet machine

    Kolondzovski, Z., Belahcen, A. & Arkkio, A., 2009, In : Applied Thermal Engineering. 29, 13, p. 2693-2700

    Research output: Contribution to journalArticleScientificpeer-review

  58. 2007
  59. Published

    A MINLP model including the pressure levels and multiperiods for CHP process optimisation

    Savola, T., Tveit, T-M. & Fogelholm, C-J., 2007, In : Applied Thermal Engineering. 27, 11-12, p. 1857-1867

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    MINLP optimisation model for increased power production in small-scale CHP plants

    Savola, T. & Fogelholm, C-J., 2007, In : Applied Thermal Engineering. 27, 1, p. 89-99

    Research output: Contribution to journalArticleScientificpeer-review

  61. 2006
  62. Published

    Multi-period steam turbine network optimisation, Part II: Development of a multi-period MINLP model of a utility system

    Tveit, T-M. & Fogelholm, C-J., 2006, In : Applied Thermal Engineering. 26, 14-15, p. 1730-1736

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Multi-period steam turbine network optimisation, Part I: Simulation based regression models and an evolutionary algorithm for finding D-optimal designs

    Tveit, T-M. & Fogelholm, C-J., 2006, In : Applied Thermal Engineering. 26, 10, p. 993-1000

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 179281